Popular products

Tapping clamp Stainless steel tapping clamps are used to make permanent (hot) taps on different pipe types. Repair clamps can be equipped with a threa...

Flow meter type 335 Guide rod PVDF with stainless steel core (V2A) for DN50 (1500-15000 l/h) and DN65 (all ranges); see accessories variable flow mete...

Diaphragm valve PVC-U type 514 PVC-U With solvent cement sockets metric PN16 - only for water and aqueous mediums.

Flange adaptors and Reducing couplings are available from DN 350 u.t.i. DN 1400 mm and are
suitable for use on steel, ductile/cast iron, PVC and PE ...

Tapping tee type T Stainless steel tapping tee type T are used for permanent (hot) taps on several pipe types.

iJOINT 654X - Blue clamp saddles with stainless steel reinforcement ring, flat gasket and stainless steel bolts and nuts (PN16-PN10)

Straight Coupling SR-505 1.4571. Through the use of surface-coated coupling nuts, the tightening torque reduces up to 35%. Furthermore, a cold welding...

+GF+ TANGIT ABS Solvent Cement 0,65 kg for the joining of ABS pipes. Ideal for use in pressure applications as the bond is very flexible and waterproo...

Victaulic Elbow 90° Style 10 Fittings available from ¾ – 24″ | DN20 – DN600

Marine Spring isolator Type 10 Helical steel spring to BS1726 Class B. Inclined rubber springs are first grade natural rubber to metal bonded elements...

Victaulic Style 995N sizes 4" through 14" Suitable for IPS HDPE pipes Tensile strength 110,000 psi/758340 kPa

Victaulic QuickVic Flexible Coupling Style 177N Available Sizes 2 – 8"/DN50 – DN200 Pipe Material Carbon steel; Stainless steel For exceptions,...

Victaulic SnapJoint Coupling Galvanized Style 78 Available Sizes 1 – 8"/DN25 – DN200 Pipe Material Carbon steel For exceptions reference section 6...

Tank adaptor type 050 PVC-U Gaskets: O-ring EPDM, flat gasket EPDM Washer: PP Run-out holes: two holes in octagonal head

Victaulic® Snap-Joint® Coupling Style 78 Accommodates pressures ranging from full vacuum (29.9 in Hg/760 mm Hg) up to 300 psi/2068 kPa 21 bar

iJOINT 684C - Tapping Saddle for PE and PVC pipes with compression fitting offtake, flat gasket and stainless steel bolts and nuts

MULTI/JOINT® 3007 Plus Wide Range Suitable for water and gas (EPDM only for potable water) Ductile cast iron GGG45 body and clamping ring(s), DN350 &...

92S hore A Elastic couplings reduce intermittent short-period torsional shocks by briefly storing part of this shock energy elastically. The operating...

Elastic couplings reduce intermittent short-period torsional shocks by briefly storing part of this shock energy elastically. The operating temperatur...

HS-2 Repair Clamp 200 Clamp double band are suitable for the repair of ALL pipe types. GRP and PE pipes can be repaired with specially adjusted repair...

Flange adaptors and Reducing couplings are available from DN 350 u.t.i. DN 1400 mm and are
suitable for use on steel, ductile/cast iron, PVC and PE ...

Fastfit Grip pipe flange adaptors the new pull-out resistance “Fastfit Grip” flange adaptors for PE and PVC pipes. End rings, press rings, sleeves...

Ductile Iron Repair Clamps have been designed for the permanent repair of ductile iron,
cast iron and steel pipes. Repair Clamps GGG40 ductile iron D...

Wencon Reinforcement Tape is the right product. Extremely strong and flexible. Especially used for pipe repairs. Two different widths are available, 5...