Popular products

Diaphragm valve PVC-U type 514 PVC-U With solvent cement sockets metric PN16 - only for water and aqueous mediums.

+GF+ TANGIT PVC-U Solvent Cement 500 gr Adhesive for connecting PVC-U pipes. Special adhesive for hard PVC. High pressure applications up to 16 bar.

PVC-U gray SDR13,6 L=5 material: PVC-U dimensions: according to DIN 8061/62 colour: dark gray RAL 7011

Victaulic EPDM rubber seal for Style 07/75/77/78. Approved to ANSI/NSF 61. Flexible seals, coat rubber with lubricant.

iJOINT compression fittings Coupling installation without disassembling suitable for PE and PEX pipes water PN16 material PP gasket EPDM quality.

Repair Kit for pipe leaks polyurethane resin impregnated fibreglass role, used to repair weakened, damaged or even leaking pipes and tanks

HS-C Repair Clamp L150 Repair Clamps is used for the permanent repair of damaged pipes above ground. For water, gas and petrochemical fluids.

Pressure Gauge with Horizontal Diaphragm with bayonet ring housing, for measurement of fluids and contaminated or very thick liquids

Fire Hose Valve Straight Type Fire Hose Valve Straight Type Norm: EN (DIN) Construction: Straight Type Size: DN40 to DN65 (1 1/2” up to 2 1/2”)

Hexagon nut stainless steel Stainless steel hexagon nuts are available with metric thread from M6 to M16 inclusive To DIN 934/ISO 4032 Stainless steel...

Hanging fixed point Epoxy powder coated steel frame tested to 5 x rated load. Other steel parts are zinc plated. Rubber hangers supplied with failsafe...

Griffon UNI-100 XT 250-1000ml Special adhesive for critical media Max. PN10/d140

Flange adaptors and Reducing couplings are available from DN 350 u.t.i. DN 1400 mm and are
suitable for use on steel, ductile/cast iron, PVC and PE ...

Victaulic flexible coupling DUPLEX Style 77DX / standard EPDM Available Sizes: ¾ – 6"/DN20 – DN150. For 8 – 18"/DN200 – DN450 sizes, Victauli...

Lug-style butterfly valve type 578 PVC-U Hand lever with ratchet settings

Victaulic Elbow 90° Style 10 Fittings available from ¾ – 24″ | DN20 – DN600

Victaulic Style 475 Stainless Steel 316 Sizes from 1 – 4″ | DN25 – DN125 and 165.1 mm Pressures up to 500 psi | 3447 kPa | 34 bar

Model End connection solvent cement socket, metric Gasket flat gasket EPDM Washer PP Run-out holes two holes in octagonal head

iJOINT compression fittings Coupling installation without disassembling suitable for PE and PEX pipes water PN16 material PP gasket EPDM quality.

Mikalor Supra W2 Heavy-Duty Clamp 29-31 mm to 63-68 mm: Bolt = M7, Band width = 20 mm
68-73 mm to 121-130 mm: Bolt = M8, Band width = 25 mm

Ball valves have proven their worth in many applications as very reliable and compact shut-off valves. Various types such as 2-way, 3-and 4-way ball v...

Plus Range products have an outside diameter range of up to 34 mm. Within every nominal size nearly all outside pipe diameters can be joined, whether ...

Diaphragm valve NBR type 514 PVC-U EPDM glueable. Double flow rate compared to predecessor, one housing nut replaces four screws.

Enclosed Spring Mountings ECS Designed primarily for building services applications for the control of low frequency vibration and noise emanating